General
| Max Printing Speed1 | 1200mm/s |
| Max Acceleration2 | 40000mm/s2 |
| Peak Flow Rate3 | 110mm3 /s @FLSUN PLA-HS |
| Build Volume5 | Φ320mm*430mm (maximum height of the cylinder: 383mm) |
| Chamber | Closed |
Tool Head
| Nozzle | 0.4mm Hardened Steel Nozzle |
| Max Hot End Temp. | 350℃ |
| Filament Diameter | 1.75mm |
Heatbed
| Build Plate | Textured PEI Plate |
| Max Build Plate Temp. | 120℃ |
| Smart Zone Heating | Inner Circle Φ220mm, Outer Ring 220-320mm |
Features
| Monitoring Camera | Realtime, Timelapse |
| Filament Detection | Yes |
| Filament Clog Detection | Yes |
| Vibration Compensation | Yes |
| Debris Detection | Yes |
| Spaghetti Detection | Yes |
| Screen Auto Sleep | Yes |
| Printer Auto Power Off | Yes |
| Smart Zone Heating | Yes |
| Auto-Leveling | Yes |
| Power Loss Recover | Yes (Z lift, Backup Battery) |
| Air Filter | HEPA + Activated Carbon |
Electronics
| Display | 7” Color Touch Screen |
| Storage | 16GB EMMC、 32GB USB Flash |
| Power Supply | 110-240V, 50/60HZ |
| Physical Dimension | 550*595*1030mm |
| Net Weight | 41kg |
Software
| Firmware Upgrade | OTA |
| Slicing Software | FLSUN Slicer V2.0、 Other Slicers |
| Slicer Supported OS | MacOS, Windows |
| Formats for Slicing | STL, OBJ, AMF, 3MF |
Filament
| Supported Filament | PLA, PETG, TPU |
| Satisfactory | ABS, ASA, PA, PC, PET |
| Capable | Carbon/Glass Fiber Reinforced PLA |
| Active Heating Dry Box | Yes |
Note:
1. The maximum printing speed refers to peak instantaneous speed. Actual speed is adaptive based on printing algorithms and may vary depending on parameters, model, slicing software, and environment.
2. Maximum toolhead acceleration refers to peak instantaneous acceleration. Actual acceleration adapts automatically and may vary due to parameters, model, slicing software, and environment.
3. Peak flow indicates instantaneous flow rate. Actual flow adapts automatically and may vary with parameters, model, slicing software, and environment.
4. Data is collected by FLSUN under consistent environmental and printing parameters.
5. Maximum build height applies to the center point; height limit decreases gradually from center to edges, reaching 383mm at the outermost edges.
6. Decibel level data is collected in an enclosed chamber, one meter from the printer. Actual noise level may vary with ambient noise, room dimensions, surrounding surfaces, and atmospheric conditions.
7. Availability of FLSUN World features may vary depending on the region/country, OS version. The features described on the page may not be included in the software version at launch, they wilI be updated via OTA.
* Product images are for reference only. Specifications and descriptions may change due to supplier or manufacturer updates. Data is based on FLSUN technical parameters and laboratory tests, and may vary slightly depending on testing environment, software version, and specific model version.