Cleaning Needles 10x 0.3 x 70 mm

€ 6,00 (€ 4,96 excl. BTW) stuk
Gewicht: 0.1 kg

Aan winkelwagen toevoegen Aan verlanglijst toevoegen

Cleaning Needles 10x 0.3 x 70 mm



The sharp flexible needle makes loosen clogged residue easy and effortless. The all-metal quality build was specially chosen to withstand the heat of the nozzle and to be safe from melting plastic.

Needle Method

To remove a clog with the needle method an acupuncture or hypodermic needle is required. The size of the needle needs to be small enough to fit the nozzle. For a standard diameter of 0.4mm, the 0.3mm needle works perfect. Preheat the nozzle to the regular printing temperature for the material last in use. Be careful, the nozzle is hot and the all-metal construction of the needle conducts heat well. The goal is to break the blockage and clear the nozzle. Insert the needle from below and carefully move it around. Then remove the needle and insert filament manually from above and & push through. If the blockage is not yet clear repeat the steps. If this method does not work an alternative is the cold pull



Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

OP Zaterdags GESLOTEN (eventueel op afspraak)

Zondag Gesloten



Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem




Multi 3D Print BV, Oudeweg 91-95 Unit A.02-03, 2031 CC Haarlem, The Netherlands
Copyright Multi-3DPRINT B.V. © 2023. All Rights Reserved.