DSM Novamid AM1030 FR Natural 1,75mm 500gr

image
imagenovamid_0002
€ 65,28 (€ 53,95 excl. BTW) stuk
Gewicht: 0.5 kg


Aan winkelwagen toevoegen Aan verlanglijst toevoegen

NOVAMID® AM1030 FR (F)

the first ever UL Blue Card certified PA6/66 filament for open systems. UL’s Blue Card program is specially developed for certification of materials for additive manufacturing. Novamid® AM1030 FR is completely halogen-free, making it environmentally friendly. Validated in an UL-certified lab, the DSM material meets a UL 94 rating of V-0 at 1.6 & 3.2 mm wall thickness and a UL 94 V-2 rating at 0.85mm wall thickness.

UL requires Blue Cards for 3D printing materials to be printer specific; this material was tested on an Ultimaker S5 printer. Nevertheless, being an open platform material, users with any open platform fused filament fabrication system can work with Novamid® AM1030 FR (F).

 

NOVAMID® AM1030 FR (F) features:

  • First ever UL Blue Card certified PA6/66 filament for open systems.
  • Novamid® AM1030 FR is completely halogen-free, making it environmentally friendly.
  • UL’s Blue Card program is specially developed for certification of materials for additive manufacturing.
  • Validated in an UL-certified lab, the DSM material meets a UL 94 rating of V-0 at 1.6 & 3.2 mm wall thickness and a UL 94 V-2 rating at 0.85mm wall thickness.
  • UL requires Blue Cards for 3D printing materials to be printer specific; this material was tested on an Ultimaker S5 printer. Nevertheless, being an open platform material, users with any open platform fused filament fabrication system can work with Novamid® AM1030 FR (F).

Colours:

Novamid® ID1030 CF10 is available from stock in:

na1

Packaging:

Novamid® AM1030 FR (F) @DSM is available in the original packaging of DSM.

Additional info:

Common fused filament fabrication (FFF) equipment should work with Novamid® filaments, direct drive as well as Bowden type extruders. Typical settings for any slicing software (e.g. Slic3R, Cura, Simplify3D) are listed below. Note that for different nozzle diameters the settings should be changed accordingly.


Storage:

In order to prevent moisture pick up and contamination, supplied packaging should be kept closed and undamaged. For the same reason, partially used bags should be sealed before re-storage. Allow the material that has been stored elsewhere to adapt to the temperature in the processing room while keeping the bag closed.

Contactgegevens

Openingstijden

Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

OP Zaterdags GESLOTEN (eventueel op afspraak)

Zondag Gesloten

 

Adres

Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem

Bellen

085-3037232

Mailen

info@multi-3dprint.nl

Multi 3D Print BV, Oudeweg 91-95 Unit A.02-03, 2031 CC Haarlem, The Netherlands
Copyright Multi-3DPRINT B.V. © 2024. All Rights Reserved.

Search