Luvocom® 3F PAHT CF 9891 BK Filament

€ 108,84 (€ 89,95 excl. BTW) stuk
Gewicht: 0.75 kg

Filament diameter

Aan winkelwagen toevoegen Aan verlanglijst toevoegen

Luvocom® 3F PAHT CF 9891 BK Filament


Luvocom® 3F PAHT CF 9891 BK Filament is a high temperature carbon fiber (15%) reinforced polyamide (PA). This grade is based on PA6 and is easy to print with low warping and improved layer bonding is optimised for industrial applications. Typical industries where it is commonly used are in robotics, drones, automotive, aerospace and also widely in the field of functional prototypes and end parts. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts, the filament can be used on conventional FFF / FDM 3D printing systems without an heated chamber. This 3D4Makers PAHT CF filament features the following properties:

  • Low influence from moisture and temperature to measures and electrical properties
  • Designed for industrial applications
  • Carbon Fiber Reinforced Material (15%)
  • PA6 based material


Material properties

DescriptionValueTest method
Density 1,24 g/cm³ ISO 1183-3
Tensile  strength (at 23°C/50% rh) 130 MPa ISO 527
Elongation at maximum force
2 %
ISO 527
Modulus of Elasticity  (at 23°C/50% rh) 11,5 GPa ISO 527
Charpy impact strength 35 kJ/m² ISO 179 1eU
Heat Distortion Temp. 90 °C ISO 75
Continuous service temperature (20.000 h) 120 °C EC 60216
Service temperature (during lifetime max. 200h) 160  °C /
Insulation resistance strip electrode (R25) ≤10² Ω DIN IEC 60167
Surface resistance (ROB) <10² Ω DIN IEC 60093

Printer recommendations 

Printer nozzle temperature 260 - 290°C
Heated bed temperature 60 - 80°C
Print Speed 40 - 60 mm/s
Bed Adhesion Magigoo PA on glass or a PEI Sheet
Pre drying recommendations 100°C, 4 - 6 hours or 80°C, 12 hours
Extra We advise to use a adapted nozzle (>0.5mm) for carbon filled filaments

*Printing profile available in Ultimaker Marketplace

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. When the 3D printer is not being used it is important to keep filament in a bag and stored in a cool, dry and dark place until it is used again.



Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

OP Zaterdags GESLOTEN (eventueel op afspraak)

Zondag Gesloten



Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem




Multi 3D Print BV, Oudeweg 91-95 Unit A.02-03, 2031 CC Haarlem, The Netherlands
Copyright Multi-3DPRINT B.V. © 2023. All Rights Reserved.