Controleer altijd bij ons of er voorraad is. Wij bieden tevens mogelijkheid voor Lease contracten, neem contact met ons op.

CREALITY ENDER-3 MAX - 300x300x340 MM

€ 279,00 (€ 230,58 excl. BTW) stuk Gewicht: 10 kg
Merk: Creality 3DCreality 3D

Aan winkelwagen toevoegen Aan verlanglijst toevoegen

CREALITY ENDER-3 MAX - 300x300x340 MM


Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm.


  • Large print size of 300x300x340 mm
  • Heated build platform with Carborundum glass plate
  • Dual cooling fans
  • Modular and powerful hot end
  • Resume print function
  • Intelligent filament sensor
  • TMC2208 drives for silent operation
  • Prepared and ready for upgrades (such as a BLTouch)

Ender 3 Max is the latest version of the popular Ender 3 series from the well-known manufacturer – Creality. It´s an affordable, large size printer that have a print volume of 300 x 300 x 340mm.

Heated build platform

The build plate can be heated to a maximum of 100°C. Thanks to this you print most common filaments such as PLA, PLA Tough, PETG and other similar materials without running the risk of warping.

Borosilicate glass plate

Thanks to the very hard glass plate you will get silky smooth prints that sticks very well. For extra security wo do recommend using, for example, PrimaFIX to make you prints stick even better.

Dual cooling fans

The dual axial cooling fan always makes sure that the filament cools down as quickly as possible. The is very important if you print much in PLA.

Powerful hot end

The Ender 3 max is equipped with a modular hot end. This ensures that your result always will be the best possible

Resume print function

Did the power suddenly or accidentally go off? No worries! The Ender 3 Max 3D Printer will resume printing if the power supply is interrupted. That’s right—you can forget about starting over because print failure is no longer an issue!

Intelligent sensor with filament breakage detector

Sometimes filament can run out, or in worst case – break. Thanks to the new intelligent sensor, the printer will stop the current print so you can change filament. Once that is don, you can continue the print as nothing had happened.

Power when you need it

The 350-w power supply makes sure that you have a perfect flow of power in every situation. You can switch between 100V – 240V.

High performance drivers

Thanks to the TMC2208 drivers that are in use in the X and Y axis, you will get a very smooth and silent running

Upgrade friendly

The manual leveling system works very well, but if you for some reason would prefer a auto level-system, the Ender3 Max in prepared for this. There is already space reserved for this option on the printer.


Construction an Technical Details  
Usable Nozzle Typ MK8
Usable Filament Diameter 1,75 mm
Nozzle Temperatur Max 250 °C
Open Filament System Yes
Extruder Typ Bowden
Printing Speed Max 180 mm/s (depends on material)
Build Area 300 mm x 300 mm x 340 mm
Heated Build Plate Yes
Build Plate Temperature Max 100 ºC
Build Plate Material Carborundum glass plate
Build Plate Attachment clamp
Build Plate Leveling System BL-Touch optional
Build Chamber During Process Open
Extruder Number 1
Installation Space / Requirements  
Total Mass 513 mm x 563 mm x 590 mm
Total Weight 9,5 kg
Power Consumption Max 350 W
Voltage AC: 100 V - 240 V (50/60 Hz) DC: 24 V
Filament Runout Sensor Yes
Powerloss Fail Safe Yes
Memory Card Yes, micro-SD
USB Yes, 1x micro USB
Layer Height 0,1 mm - 0,4 mm
Resolution 0,1 mm


Ender-3 Max



Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

Zaterdag 13.00 - 17.00

Zondag Gesloten



Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem




Copyright Multi-3DPRINT B.V. © 2022. All Rights Reserved.