Prusa Double-sided Textured PEI Powder-coated Spring Steel Sheet

powder-coated-spring-steel-sheet
€ 50,00 (€ 41,32 excl. BTW) stuk
Gewicht: 0.25 kg


Aan winkelwagen toevoegen Aan verlanglijst toevoegen

Double-sided textured PEI powder-coated spring steel sheet for the Original Prusa i3 MK3/S and MK2.5/S.

 

MORE INFO

OVERVIEW:

The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.

Find more details about the spring steel sheets in our knowledgebase.

WARNING:

Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. Learn more about printing on the Textured PEI Powder coated steel sheet on our Blog.

Note:

Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

ATTRIBUTES

                           PLUS                                                                                                      MIN

 

Scratchproof, hard to damage

 

PLA prints with a small contact area may need a brim

 

Transfers texture to prints

 

PLA prints with a huge footprint may warp

 

More forgiving Live Adjust Z setting

 

Need to change Live Adjust Z if you also own Smooth PEI sheet

 

No need for Windex with PETG

 

Never clean with acetone

 

No need for glue stick with FLEX

   
 

Prints automatically detach after sheet cools down

   
 

First layer can be more squished compared to smooth sheets

   

Contactgegevens

Openingstijden

Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

OP Zaterdags GESLOTEN (eventueel op afspraak)

Zondag Gesloten

 

Adres

Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem

Bellen

085-3037232

Mailen

info@multi-3dprint.nl

Multi 3D Print BV, Oudeweg 91-95 Unit A.02-03, 2031 CC Haarlem, The Netherlands
Copyright Multi-3DPRINT B.V. © 2024. All Rights Reserved.

Search