PEI ULTEM 1000 Filament 1.75mm 750 gram Natural

750g_791772500
€ 237,00 (€ 195,87 excl. BTW) stuk
Gewicht: 1 kg


Aan winkelwagen toevoegen Aan verlanglijst toevoegen

PEI ULTEM 1000 (POLYETHER IMIDE) ULTEM FILAMENT 

The 3D4MAKERS PEI Ultem 1000 Filament will be delivered in a vacuum packaging in our recyclable box. 

Technical information:

Polyether Imide (PEI) Ultem 1000 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. 3D4MAKERS has selected Ultem 1000 for their filament.

The 3D4MAKERS PEI Ultem 1000 Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PEI Ultem 1000 Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

Measurements & Tolerance

SizeDiameter tolerance roundness

1,75 mm Filament

+/- 0,05mm

97%

2,85 mm Filament

+/- 0,06mm

97%

Moisture content
< 0,05%
 

Physical properties

DescriptionValueTest method
Density 1,27 g/cm3 ISO 1183

Mechanical properties

DescriptionValueTest method
Tensile Modulus 3200 Mpa ISO 527
Tensile Stress 105 MPa ISO 527
Impact strength Notched Izod 5.0 Kj/m² ISO 180

Printer settings

DescriptionValue
Printer nozzle temperature 355 - 390°C
Heated bed temperature 120 - 160°C

 

To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep.

When the 3D printer is not being used it is important to keep the 3D4MAKERS PEI Ultem 1000 Filament in a bag and stored in a cool, dry and dark place until it is used again.

Safety information

REGULATION (EC) No. 1272/2008. According to EC regulations this product is not classified as dangerous for supply/use.

Classification according to EU-directive 67/548/EEC or 1999/45/EC. According to EC criteria this product is not classified as dangerous for supply/use.

COMPOSITION AND INFORMATION ON THE COMPONENTS

 

 

CAS-Nr./EG-Nr./Index

REACH Nummer

Bestanddeel

Classificatie        Verordening         (EG) Nr. 1272/2008

(EG) Nr. 67/548/EEC

CAS-Nr. 61128-46-9

EG-Nr.Polymeer

  ----------

Polyetherimide

Not classified

Exposure controls / Personal protection

Local Exhaust Ventilation at the workplace or on the 3D printer is required.

Legally Obliged Information

1 Specific safety, health and environmental regulations and legislation for the substance or mixture.

Classification of the substance or mixture

The substance is not classified as dangerous according to Regulation (EC) no 1272/2008 (CLP/GHS) and Directive 67/548/EEC.

2 Chemical safety assessment: Does not apply

RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals).

Recommended restrictions

Do not use in medical applications involving permanent implantation in the human body.

The PEI Ultem 1000 Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.

Environmental information

Plastic waste can damage the environment. 3D misprints must be separated with plastic waste together with the Filament reel. 3D4MAKERS is developing a return system for  3D misprints and the Filament reel.

Together we can protect the environment! 

Related products

€ 6.048,79 (€ 4.999,00 excl. BTW) stuk INTAMSYS FUNMAT HT Enhanced 3D Printer
Aan winkelwagen toevoegen Aan verlanglijst toevoegen
Resultaten 1 - 1 van 1

Contactgegevens

Openingstijden

Maandag 09:00 - 17:00

Dinsdag 09:00 - 17:00

Woensdag 09:00 - 17:00

Donderdag 09:00 - 17:00

Vrijdag 09:00 - 17:00

OP Zaterdags GESLOTEN (eventueel op afspraak)

Zondag Gesloten

 

Adres

Oudeweg 91-95 Unit: A.02/0.3
MAAK Haarlem
2031 CC Haarlem

Bellen

085-3037232

Mailen

info@multi-3dprint.nl

Multi 3D Print BV, Oudeweg 91-95 Unit A.02-03, 2031 CC Haarlem, The Netherlands
Copyright Multi-3DPRINT B.V. © 2024. All Rights Reserved.

Search