Technical information:
Polyether Imide (PEI) Ultem 1000 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings. 3D4MAKERS has selected Ultem 1000 for their filament.
The 3D4MAKERS PEI Ultem 1000 Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PEI Ultem 1000 Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.
Measurements & Tolerance
Size | Diameter tolerance | roundness |
1,75 mm Filament
|
+/- 0,05mm
|
97%
|
2,85 mm Filament
|
+/- 0,06mm
|
97%
|
Moisture content |
< 0,05% |
|
Physical properties
Description | Value | Test method |
Density |
1,27 g/cm3 |
ISO 1183 |
Mechanical properties
Description | Value | Test method |
Tensile Modulus |
3200 Mpa |
ISO 527 |
Tensile Stress |
105 MPa |
ISO 527 |
Impact strength Notched Izod |
5.0 Kj/m² |
ISO 180 |
Printer settings
Description | Value |
Printer nozzle temperature |
355 - 390°C |
Heated bed temperature |
120 - 160°C |
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep.
When the 3D printer is not being used it is important to keep the 3D4MAKERS PEI Ultem 1000 Filament in a bag and stored in a cool, dry and dark place until it is used again.
Safety information
REGULATION (EC) No. 1272/2008. According to EC regulations this product is not classified as dangerous for supply/use.
Classification according to EU-directive 67/548/EEC or 1999/45/EC. According to EC criteria this product is not classified as dangerous for supply/use.
COMPOSITION AND INFORMATION ON THE COMPONENTS
CAS-Nr./EG-Nr./Index
|
REACH Nummer
|
Bestanddeel
|
Classificatie Verordening (EG) Nr. 1272/2008
(EG) Nr. 67/548/EEC
|
CAS-Nr. 61128-46-9
EG-Nr.Polymeer
|
----------
|
Polyetherimide
|
Not classified
|
Exposure controls / Personal protection
Local Exhaust Ventilation at the workplace or on the 3D printer is required.
Legally Obliged Information
1 Specific safety, health and environmental regulations and legislation for the substance or mixture.
Classification of the substance or mixture
The substance is not classified as dangerous according to Regulation (EC) no 1272/2008 (CLP/GHS) and Directive 67/548/EEC.
2 Chemical safety assessment: Does not apply
RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals).
Recommended restrictions
Do not use in medical applications involving permanent implantation in the human body.
The PEI Ultem 1000 Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.
Environmental information
Plastic waste can damage the environment. 3D misprints must be separated with plastic waste together with the Filament reel. 3D4MAKERS is developing a return system for 3D misprints and the Filament reel.
Together we can protect the environment!